Wednesday, May 3, 2017

Week 04/27 to 05/03

In this week, our team focused on fixing the corrugated metal strips, especially for the curve position. After we did the test for the sensor, we found that when the bogie passed the curve, some of the peaks of the strips would miss data. It means the sensor was not close enough to the strips. Therefore, we took off all the corner strips, and add a double tape between strips and track. It could reduce the distance between the sensor and the strips.
In addition, the sensor bracket was not as good as what we expected, so we designed another one. Also, we will test on Thursday or Friday.

No comments:

Post a Comment